Studio Series Microphones - FET

download specs
SC-1 Specs [PDF]

Model SC-1
Small Capsule Condenser

Model SC-1 SPECIFICATIONS
TYPE: True condenser small capsule wide cardioid mic with clip and box.
POLAR PATTERN: Fixed Cardioid
SENSITIVITY: 10mV/Pa -40dBV (0dB=1v/Pa)
FREQUENCY RANGE: 20 to 20k Hz
IMPEDANCE: <200
RECOMMENDED LOAD IMPEDANCE: 1000 ohms
MAX. SPL for 1% THD @1000Hz: 124dB
EQUIVALENT NOISE LEVEL: IEC 268-4(A weighted): 20dB Typical
S/N RATIO 1Pa : 74dB
POWER CONSUMPTION: 48V phantom power
CONNECTOR: 3-pin XLR
DIMENSIONS: Diameter 22mm (0.9in), Length 130mm (5.5in)
NET WEIGHT: 130g (5oz)
 
APPLICATIONS

For Overheads, Acoustic Instruments such as Guitar, Piano, etc. Use an A-51 on the Sound Hole and A-51SC on the 12th Fret on Acoustic Guitar for a great Stereo Acoustic Guitar and get great clarity and also very good sonic detail This microphone loves fretted instruments: flattering on most stringed instruments.

 
CONFIGURATIONS
SC-1 DLX - Microphone / Mic Clip / Vinyl Pouch / in Box
SC-1 PRO - Microphone / Mic Clip / Vinyl Pouch / in Small Aluminum Flight Case
 
* Specifications subject to change without notice. © 2003 ADK Microphones. All Rights Reserved.

Back to Previous